Back to start        
Mortar Rake Unit with 3 Cemented Tungsten Carbide Bits for angle grinder
A power tool accessory for the fast and efficient removal of mortar and cement joints in brickwork repointing applications. Also usable for chasing out channels in the installation of cable, pipes and switchboxes in bricks, plaster, gas concrete. Works vertically as well as horizontally. The mortar rake is screwed directly on the spindle of the angle grinder. Available in diameter: 6, 8, 10, 12 and 14 mm
  Mortar Rake Unit with Cemented Tungsten Carbide Bits for angle grinder
A power tool accessory for the fast and efficient removal of mortar and cement joints in brickwork repointing applications. Also usable for chasing out channels in the installation of cable, pipes and switchboxes in bricks, plaster, gas concrete. Works vertically as well as horizontally. The mortar rake is screwed directly on the spindle of the angle grinder. Available in diameter: 8 and 10 mm
Long Mortar Rake Unit with 3 Cemented Tungsten Carbide Bits for angle grinder
A power tool accessory for the fast and efficient removal of mortar and cement joints in brickwork repointing applications in a depth of 55 mm. Also usable for chasing out channels in the installation of cable, pipes and switchboxes in bricks, plaster, gas concrete. Works vertically as well as horizontally. The mortar rake is screwed directly on the spindle of the angle grinder. Available in diameter: 8 and 10 mm
  Tungsten Carbide Coated Mortar Rake for angle grinder.
For the remoaval of bricks.The mortar rake is screwed directly on the spindle of the angle grinder. Adjustable for variable clearance depths.
Mortar Rake with 3 Cemented Tungsten Carbide Bits for drilling machine
A power tool accessory for small jobs of removal of mortar and cement joints in brickwork repointing applications on difficulty accessible places. Also usable for chasing out channels in the installation of cable, pipes and switchboxes in bricks, plaster, gas concrete. Works vertically as well as horizontally. With hexagonal shank direct in the drilling machine. Available in diameter: 10 mm
  Tungsten Carbide Coated Mortar Rake for angle grinder
A power tool accessory for chasing out channels in the installation of cable, pipes and switchboxes in brickwork, plaster, gypsum, plastic. Works vertically as well as horizontally. The mortar rake is screwed directly on the spindle of the angle grinder. Available in diameter: 8, 10 and 12 mm
Sole Plate for angle grinder
Fits the spindle collar of Bosch, Dewalt, Fein, Hitachi, Makita, Metabo and others. Very efficient dust extraction. Adjustable for variable clearance depth.
  Guiding Plate in nylon for angle grinder
Follows almost automatically the joint.Preventing marks on the brickwork. Fits the spindle collar of Bosch, Dewalt, Fein, Hitachi, Makita, Metabo and others. Very efficient dust extraction. Adjustable for variable clearance depth.
Sole Plate for phneumatic angle grinder.
Fits the spindle collar of Uruy. Very efficient dust extraction. Adjustable for variable clearance depths.
  Diamond Tuckpointing Blade
Segment height: 12 mm. Available in 6,4 - 8 - 10 mm
Masonry reciprocating saw blade
Tungsten carbide tipped

Used for cutting in a wide range of soft stone products such as clay bricks, joints and autoclaved aerated concrete. This is useful when replacing old bricks, when adding extra isolation material or when removing part of a wall.

 

 

Clik on the image for further info.